Product Description
Regis's all-new directional valves are available in two-way, three-way configurations in port sizes from M5 to 1/2". Select either a direct-acting poppet or solenoid-controlled pilot operated balanced spool design. Spool valves are body ported but can be bolted to a parallel circuit manifold.
These electronic valves offer high flow in a small package, and are constructed of aluminum, stainless steel and thermoplastic materials. The four-way valves are also available in 3 position versions with either pressure center, closed center or exhaust center spool options.
Materials: Aluminum, Stainless Steel, Thermoplastic
Maximum Pressure: Vacuum to 150 psig (direct acting only); 20 to 125 psig (spool valves)
Response Time: Less than 20 ms
Mounting: Manifold standard.
Manual Override: Locking or non-locking
Electrical Connection: DIN terminal with LED Indicator or Wire Lead
Temperature Range: 0 to 65°C (32° to 150°F)
Seals: NBR
| Example |
2W-025-10-F-AC110V-D |
| Meanings |
Model |
Aperture of
Flow Rate |
Port Size |
Initial Estate |
Voltage |
Wiring Form |
| Explain |
2W:two position two way solenoid valve
(direct drive type)
2WH:tow position two way solenoid valve
(high pressure direct drive type) |
012:1.2MM
020:2MM
025:2.5MM
040:4.0MM |
06:1/8"
08:1/4"
10:3/8 |
blank:
pipe join type
F :flang type |
DC12V
DC24V
AC24V
AC36V
AC110V
AC220V
AC380V |
blank:lead wire type
D: join connector
E:blast-proof coil
G:water-proof coil |
|
|
|
|
| Model |
2W025-06 |
2W025-08 |
2W040-10 |
2WH012-06 |
2WH012-08 |
2WH020-10 |
| Fluid |
AIR |
| Operating |
direct drive type |
| Type |
Normal Close Type |
| Aperture of flow rate |
2.5 |
4 |
1.2 |
2 |
| CV value |
0.23 |
0.6 |
0.05 |
0.15 |
| Operation Fluid Viscosity |
20cst below |
| Working Pressure |
0-7 |
0-20 |
| Max Pressure Resistance |
10 |
35 |
| Voltage Range |
±10% |
| Material of body |
Brass |
| Material of oil seal |
NBR EPDM VITON |
